Proposed Hazard Identification Handling Using Hazard Identification Risk Assessment and Determining Control (HIRADC) Techniques (Study Case at PT. DGEX Indonesia Soekarno-Hatta)

Krismonila Febriariesta, Muhammad Rafly AlFadly, Muhammad Rifni, Nursery Nasution

Abstract


This study discusses the proposed handling of hazard identification using the study case Hazard Identification Risk Assessment and Determining Control (HIRADC) technique at PT. DGEX Indonesia. The situation in the work environment that uses energy is one of the causes of the potential danger of workplace accidents in the work environment. With the existence of OHS can reduce the risk of workplace accidents, and can also reduce losses both in the costs and productivity of the workers themselves. The purpose of this study is to obtain a culture profile of Occupational Health and Safety (OHS) and find out the potential hazards that arise. This study uses the HIRADC method (hazard identification, risk assessment, and determining control). Data processed with HIRADC is obtained from interviews, observations, and company data. The results of the health and safety evaluation with the HIRADC method through PT DGEX Indonesia is that there are still many dangerous activities. For example, an activity that has a very high, high, and normal risk rating.


Keywords


hazard identification, risk assessment, determining control, occupational health and safety

Full Text:

PDF

References


“PT. DGEX Indonesia Hazard Identification Risk Assessment Determining Control (HIRADC),” 2018.

R. Afandi, D. Arie, and Yuniar, “Usulan Penanganan Identifikasi Bahaya Menggunakan Teknik Hazard Identification Risk Assesment and Determining Control (Hiradc) (Studi Kasus: Pt. Komatsu Undercarriage Indonesia),” Reka Integr., vol. 2, no. 3, pp. 25–35, 2014.

Anizar, Teknik Keselamatan dan Kesehatan Kerja. Yogyakarta: Graha Ilmu, 2009.

F. S. Burta, “Evaluasi Penerpan Keselamatan dan Kesehatan Kerja ( K3 ) (Studi Kasus di PT.Indokon Raya),” no. 1, pp. 430–439, 2018.

IMO, IMO IMDG.1: International Maritime Dangerous Goods Code (Volume 1), vol. 1, no. Volume 1. 2006.

International Civil Aviation Organization, The Safe Transport of Dangerous Goods by Air, no. July. 2001.

D. D. Kania, E. Probo, and H. Hanifah, “Analisis Faktor Budaya Keselamatan Dan Kesehatan Kerja (K3) Pada Penanganan Kargo Di Bandara Soekarno Hatta International Airport,” J. Manaj. Transp. Dan Logistik, vol. 3, no. 1, p. 77, 2017.

J. Matatula, “OHSAS 18001 : 2007 Sistem manajemen keselamatan dan kesehatan kerja ­ Persyaratan Occupational health and safety management systems – Requirements,” pp. 1–19, 2007.

M. R. Mukti, “Pengaruh Manual Material Handling (MMH) DAN Kesehatan Keselamatan Kerja (K3) Terhadap Kinerja Karyawan Pada PT. Rotaryana Contracting Group (RCG) Jakarta Tahun 2018,” 2019.

Setiyabudi, Kesehatan dan Keselamatan Kerja di Lingkungan Industri. 2007.

Sidoarjo, Hazard Identification Risk Assessment and Determining Controls, (OHSAS 18002:2008, CLAUSE 4.3.1). 2009.

A. Wijaya, T. Panjaitan, and H. Palit, “Evaluasi Kesehatan dan Keselamatan Kerja dengan Metode HIRARC pada PT. Charoen Pokphand Indonesia,” vol. Vol. 3, no. 1, pp. 29–34, 1998.




DOI: https://doi.org/10.25292/atlr.v2i0.198

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Advances in Transportation and Logistics Research

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Advances in Transportation and Logistics Research

ISSN: 2622-5778 (online)
Published by: Institut Transportasi dan Logistik Trisakti, Jakarta - Indonesia

ATLR by http://proceedings.itltrisakti.ac.id/index.php/ATLR is licensed under a Creative Commons Attribution 4.0 International License.